Comments for Unyaaa... or just a bunch of ramblings http://unya.wordpress.com にゃにゃにゃ? Mon, 06 Apr 2009 01:22:23 +0000 http://wordpress.com/ hourly 1 Comment on Soukou no STRAIN by Fortress Guy http://unya.wordpress.com/2007/04/10/soukou-no-strain/#comment-201 Fortress Guy Mon, 06 Apr 2009 01:22:23 +0000 http://unya.wordpress.com/2007/04/10/soukou-no-strain/#comment-201 Your take on it delves a little deeper and more intellectually than I think the series deserves. I thought the plot got old and small. It also slowed down a lot. I do like what you said about relativity and its effects in the show. "Ender's Game" was the only Card book I enjoyed. Check out my take on the series to compare notes. I would be interested in your opinion. http://fortresstakes.wordpress.com/2009/04/05/soko-no-strain-2006-2007-13-episodes/ Your take on it delves a little deeper and more intellectually than I think the series deserves. I thought the plot got old and small. It also slowed down a lot.

I do like what you said about relativity and its effects in the show. “Ender’s Game” was the only Card book I enjoyed.

Check out my take on the series to compare notes. I would be interested in your opinion.

http://fortresstakes.wordpress.com/2009/04/05/soko-no-strain-2006-2007-13-episodes/

]]> Comment on HOWTO Get SMC FastIR IRDA to work under linux by unya http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-200 unya Tue, 12 Aug 2008 14:45:21 +0000 http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-200 It seems that there were some changes in the driver in one of the recent kernels, which made it stop working (though it certainly is a better starting place than "It's not supported" which was the response I got from googling it up before ;-) ) Since I haven't used irda recently, I wasn't stressed to repair it, but I will look into it. It seems that there were some changes in the driver in one of the recent kernels, which made it stop working (though it certainly is a better starting place than “It’s not supported” which was the response I got from googling it up before ;-) )

Since I haven’t used irda recently, I wasn’t stressed to repair it, but I will look into it.

]]> Comment on HOWTO Get SMC FastIR IRDA to work under linux by BigLouis87 http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-199 BigLouis87 Tue, 12 Aug 2008 09:09:45 +0000 http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-199 ...I forgive to say that my laptop is an Acer too, as ruri :D In detail it's an Acer Aspire 5673WLMI Bye :) …I forgive to say that my laptop is an Acer too, as ruri :D
In detail it’s an Acer Aspire 5673WLMI
Bye :)

]]> Comment on HOWTO Get SMC FastIR IRDA to work under linux by BigLouis87 http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-198 BigLouis87 Tue, 12 Aug 2008 09:05:42 +0000 http://unya.wordpress.com/2007/09/28/howto-get-smc-fastir-irda-to-work-under-linux/#comment-198 Hi! First of all thanks for your guide, the only which helped me a bit...! Following your guide I obtained this: state = active io 0x2f8-0x2ff io 0x6f8-0x6ff irq 3 dma 3 very similar to your setup. But when I try to load smsc-ircc2 with these parameters, I obtain always the same response: FATAL: Error inserting smsc_ircc2 (/lib/modules/2.6.24-20-generic/kernel/drivers/net/irda/smsc-ircc2.ko): No such device Please help me!! :( I tried 1000000 guides&forums on the Net, but no one results useful for me...! Thanks a lot :) BigLouis87 Hi! First of all thanks for your guide, the only which helped me a bit…!
Following your guide I obtained this:

state = active
io 0×2f8-0×2ff
io 0×6f8-0×6ff
irq 3
dma 3

very similar to your setup. But when I try to load smsc-ircc2 with these parameters, I obtain always the same response:

FATAL: Error inserting smsc_ircc2 (/lib/modules/2.6.24-20-generic/kernel/drivers/net/irda/smsc-ircc2.ko): No such device

Please help me!! :( I tried 1000000 guides&forums on the Net, but no one results useful for me…!

Thanks a lot :)
BigLouis87

]]> Comment on Broadcom 4318, ndiswrapper and wpa_supplicant under Linux by unya http://unya.wordpress.com/2008/04/06/broadcom-4318-ndiswrapper-and-wpa_supplicant-under-linux/#comment-197 unya Wed, 16 Apr 2008 21:19:11 +0000 http://unya.wordpress.com/?p=69#comment-197 Unfortunately no - As far as I know, the routers use a Broadcom binary driver (at least in case of broadcom cards), which is completely undocumented, but seems to work. I only had experience with my laptop (I still haven't got an AP in my house) Unfortunately no – As far as I know, the routers use a Broadcom binary driver (at least in case of broadcom cards), which is completely undocumented, but seems to work. I only had experience with my laptop (I still haven’t got an AP in my house)

]]> Comment on Broadcom 4318, ndiswrapper and wpa_supplicant under Linux by jhon http://unya.wordpress.com/2008/04/06/broadcom-4318-ndiswrapper-and-wpa_supplicant-under-linux/#comment-196 jhon Sat, 12 Apr 2008 17:36:29 +0000 http://unya.wordpress.com/?p=69#comment-196 Hi.. I´m looking for to connect my broadcom (or Atheros) router in client mode to a public wireless network, but it uses PEAP authentication. I´ve authorization to use the network, but i cant get it work using PEAP. I´ve tried dd-wrt and openwrt..with no sucess, do you any clue how to make this work? thanks. Hi..

I´m looking for to connect my broadcom (or Atheros) router in client mode to a public wireless network, but it uses PEAP authentication. I´ve authorization to use the network, but i cant get it work using PEAP.

I´ve tried dd-wrt and openwrt..with no sucess, do you any clue how to make this work?

thanks.

]]> Comment on Ruri by Broadcom 4318, ndiswrapper and wpa_supplicant under Linux « Unyaaa… or just a bunch of ramblings http://unya.wordpress.com/hardware/ruri/#comment-194 Broadcom 4318, ndiswrapper and wpa_supplicant under Linux « Unyaaa… or just a bunch of ramblings Sun, 06 Apr 2008 16:24:59 +0000 http://unya.wordpress.com//ruri/#comment-194 [...] Ruri [...] [...] Ruri [...]

]]> Comment on “Unya!”, or “Wind – a breath of heart” by GreenRYU http://unya.wordpress.com/2007/04/30/unya-or-wind-a-breath-of-heart/#comment-193 GreenRYU Tue, 18 Mar 2008 22:02:42 +0000 http://unya.wordpress.com/2007/04/30/unya-or-wind-a-breath-of-heart/#comment-193 "In spite of my reservations, Wind turned out to be an interesting and playable game." The sentence you are looking for my friend is "Kick ass Bishoujo Game!" ;-) “In spite of my reservations, Wind turned out to be an interesting and playable game.” The sentence you are looking for my friend is “Kick ass Bishoujo Game!” ;-)

]]> Comment on Testing Blogging Apps: QTM by renczus http://unya.wordpress.com/2008/02/03/testing-blogging-apps-qtm/#comment-192 renczus Sat, 08 Mar 2008 23:52:54 +0000 http://unya.wordpress.com/2008/02/03/testing-blogging-apps-qtm/#comment-192 Maybe next time try Adobe Contribute? Maybe next time try Adobe Contribute?

]]> Comment on ndiswrapper and Broadcom 4318 wlan card HOWTO by Wahoo http://unya.wordpress.com/2007/08/31/ndiswrapper-and-broadcom-4318-wlan-card-howto/#comment-124 Wahoo Sat, 06 Oct 2007 14:23:44 +0000 http://unya.wordpress.com/2007/08/31/ndiswrapper-and-broadcom-4318-wlan-card-howto/#comment-124 Thank you for sharing! Thank you for sharing!

]]>